Перейти к основному содержанию

Введение

This guide will show you how to remove the LCD Display from the Nokia 3560.

Запчасти

No parts specified.

  1. Press down on the release latch on the bottom of the cover. Once the latch is released, lift the cover from the phone.
    • Press down on the release latch on the bottom of the cover.

    • Once the latch is released, lift the cover from the phone.

  2. Lift the front case off of the phone body.
    • Lift the front case off of the phone body.

  3. Lift the keypad off of the phone. Lift the keypad off of the phone.
    • Lift the keypad off of the phone.

  4. The screen is held to the body by six screws.
    • The screen is held to the body by six screws.

  5. Unscrew the six screws with a Torx screwdriver (six-pointed star shaped bit).
    • Unscrew the six screws with a Torx screwdriver (six-pointed star shaped bit).

  6. Insert a flat screwdriver between the black body and plastic layer. Insert a flat screwdriver between the black body and plastic layer.
    • Insert a flat screwdriver between the black body and plastic layer.

  7. Pry the layers apart. The LCD and plastic layer will lift out as one piece.
    • Pry the layers apart. The LCD and plastic layer will lift out as one piece.

Заключение

To reassemble your device, follow these instructions in reverse order.

Sam Ryan

Участник с: 18.04.2010

1 Репутация

Автор 8 руководств

Команда

Cal Poly, Team 30-39, Garner Spring 2010 Member of Cal Poly, Team 30-39, Garner Spring 2010

CPSU-GARNER-S10S30G39

5 членов

Автор 16 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 1,869