Запчасти

Никакие детали не требуются.

  1. Remove the four rubber screw covers from encircled locations.
    • Remove the four rubber screw covers from encircled locations.

    • Using a #0 tri wing screwdriver, remove the screws previously hidden below the rubber covers.

    • If you have difficulties finding this screwdriver, it is commonly sold as a Nintendo Gameboy/Wii screwdriver.

    Добавить комментарий

  2. Pry the case open using iPhone tool (as shown), fingernails, small flathead screwdriver, etc.
    • Pry the case open using iPhone tool (as shown), fingernails, small flathead screwdriver, etc.

    • Be mindful of location and magnitude of applied force, so as not to damage the case.

    Добавить комментарий

    • Unlock the minor LCD connector by applying bilateral pressure with tweezers, as shown.

    Добавить комментарий

    • Use fingernails to pry off minor LCD mount, as shown.

    • Remove the minor LCD

    Добавить комментарий

    • Unlock the LCD main board connectors shown in red boxes on the picture .

    • Use tweezers as necessary.

    Добавить комментарий

    • Place finger nails on the connector tab as shown.

    • Lift the connector tab up.

    Добавить комментарий

    • Pull/pivot the LCD main board as shown in order to remove.

    Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Van

Участник с: 24.06.2010

7 Репутация

Автор 8 руководств

Команда

Cal Poly, Team 2-10, Johann Summer 2010 Member of Cal Poly, Team 2-10, Johann Summer 2010

CPSU-JOHANN-R10S2G10

4 членов

Автор 20 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 1

За всё время: 1,730