Введение

This is a guide to removing the macroline that connects the POPS and the regulator. This is necessary if the macroline is leaking or to disassemble the body.

Remove the macroline from the fitting by pulling the metal ring around the end of the fitting away while pulling out the macroline.
  • Remove the macroline from the fitting by pulling the metal ring around the end of the fitting away while pulling out the macroline.

    • It helps to rotate the collar to create room to pull out macroline.

Добавить комментарий

While pulling in the metal ring on the fitting, pull the macroline out.
  • While pulling in the metal ring on the fitting, pull the macroline out.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Rett Triplett

Участник с: 18.10.2013

801 Репутация

Автор 8 руководств

Команда

Clemson, Team 13-6, Benson Fall 2013 Member of Clemson, Team 13-6, Benson Fall 2013

CLEM-BENSON-F13S13G6

3 членов

Автор 8 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 6

За 30 дней: 27

За всё время: 696