Введение

How to replace the LCD screen if it is broken or cracked.

Запчасти

Никакие детали не требуются.

  1. Locate the battery cover on the bottom of the camera.
    • Locate the battery cover on the bottom of the camera.

  2. Place your thumb on the battery cover and push towards the arrow. The cover will release and pop open.
    • Place your thumb on the battery cover and push towards the arrow. The cover will release and pop open.

    • Remove the batteries from the camera.

    • Unscrew and remove four (3mm) screws on the right side of the camera. This will release the front and back casings.

    • Use your nail or a flat object to pry up the edge of the front casing. Push the casing up and back.

    • Repeat this step for the back casing.

    • Locate the black plastic strip under the screen above the white plastic strip.

    • Pull up both sides of the black piece up about a mm.

    • The black plastic piece is not meant to come all the way off, just enough to release the screen.

    • Once the piece is lifted carefully slide the screen out of the slot.

Заключение

To reassemble your device, follow these instructions in reverse order.

Dani

Участник с: 24.06.2010

21 Репутация

Автор 7 руководств

Команда

Cal Poly, Team 3-3, Johann Summer 2010 Member of Cal Poly, Team 3-3, Johann Summer 2010

CPSU-JOHANN-R10S3G3

2 членов

Автор 7 руководств

Комментариев: 0

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 1,521