Выберете то, что вам нужно
-
-
Remove the 2 screws on the back cover using a Phillips head #0 screwdriver.
-
-
-
-
Using the plastic opening kit, place the prying end of the kit into the opening created by removing the screws.
-
Gently pry open the back cover. Insert the plastic opening tool in between the cover joints.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
Еще один человек закончил это руководство.