Инструменты

No tools required.

Запчасти

Никакие детали не требуются.

  1. Use a large plastic opening tool along the rear panel: There are 4 clips to release. There are 4 clips to release.
    • Use a large plastic opening tool along the rear panel:

    • There are 4 clips to release.

  2. Slide the cover along the plastic frame. Slide the cover along the plastic frame.
    • Slide the cover along the plastic frame.

  3. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  4. Slide off the largest plastic pieces.
    • Slide off the largest plastic pieces.

  5. Bend the second small plastic piece to release it from the rubber piece. Now you can slide it out. Now you can slide it out.
    • Bend the second small plastic piece to release it from the rubber piece.

    • Now you can slide it out.

  6. Slide out the hard drive as shown in the picture Make sure to slide as shown or you may damage the USB bridge logic board.
    • Slide out the hard drive as shown in the picture

    • Make sure to slide as shown or you may damage the USB bridge logic board.

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Gaetan

Участник с: 26.12.2012

9 349 Репутация

Автор 18 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 1

За 7 дней: 9

За 30 дней: 36

За всё время: 2,364