Запчасти

Никакие детали не требуются.

  1. Unscrew these #1 Philips screws, and leave them in the plastic foot holders.
    • Unscrew these #1 Philips screws, and leave them in the plastic foot holders.

  2. Remove the foot holders and place them on the side
    • Remove the foot holders and place them on the side

  3. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  4. Remove the four feet and place them on the side
    • Remove the four feet and place them on the side

  5. Remove these #1 Philips screws, and leave them in their counterbores
    • Remove these #1 Philips screws, and leave them in their counterbores

  6. Lift grey shell off and place to the side to reveal:
    • Lift grey shell off and place to the side to reveal:

    • ADC and Logic board

    • Bluetooth module

    • Strain gauges

    • Battery holder

  7. The ADC and Logic board contains:
    • The ADC and Logic board contains:

    • Bluetooth module

    • Power button connector

    • Battery and sync button connector

    • Strain gauge wheatstone bridge connections

    • The topmost connection for each of the four bridge connections is the ground; relative to this, the two middle connections should be at 1.2 VDC, and the bottom should be at 2.7 VDC

Заключение

To reassemble your device, follow these instructions in reverse order.

11 участников успешно повторили данное руководство.

Pete Marchetto

Участник с: 25.01.2011

451 Репутация

1 Guide authored

Комментариев: 3

Great stuff Pete, being able to fix the wifi board got me mucho street cred with " her indoors " and lots of other goodies that go along with that

HENRY - Ответить

Can I take out the battery box without removing the bottom?

Richard Merchant - Ответить

No, you can't. You will have to follow this procedure completely.

paulo lima -

Просмотр статистики:

За 24 часа: 1

За 7 дней: 6

За 30 дней: 36

За всё время: 8,419