Введение

This guide is a prerequisite for replacing other parts of an Xbox 360 E.

Запчасти

Никакие детали не требуются.

Push the Spudger into the crevice between the grated top panel of the Xbox and the bottom body with the rubber feet.
  • Push the Spudger into the crevice between the grated top panel of the Xbox and the bottom body with the rubber feet.

  • Pull back on the spudger like a lever, keeping it pressed firmly into the crevice.

Добавить комментарий

Slide the spudger along the separation you have created between the grated panel and the bottom body of the Xbox.
  • Slide the spudger along the separation you have created between the grated panel and the bottom body of the Xbox.

  • Periodically pull back on the spudger like a lever, keeping it pressed firmly into the crevice.

Добавить комментарий

Continue sliding the spudger along the perimeter of the left grated face of the Xbox. Pull the top panel off. Pull the top panel off.
  • Continue sliding the spudger along the perimeter of the left grated face of the Xbox.

  • Pull the top panel off.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

3 участников успешно повторили данное руководство.

Jennifer

Member since: 02.02.2014

1 443 Репутация

Автор 4 руководств

Команда

Cal Poly, Team 2-11, Amido Winter 2014 Member of Cal Poly, Team 2-11, Amido Winter 2014

CPSU-AMIDO-W14S2G11

4 членов

Автор 11 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 1

За 30 дней: 9

За всё время: 1,068