Введение
The charging port is a common issue that comes with the Dualshock 4 controller as it could be worn overtime. In this guide, we will go through the steps on how to make a simple and easy repair on the Dualshock 4 CUH-ZCT1's charging port.
Выберете то, что вам нужно
-
-
Flip the Dualshock 4 controller on its back, and use a Phillips #00 screwdriver to remove the four 6 mm screws.
-
-
-
Slowly lift the backplate onto the front side of the controller making sure not to fully remove the backplate.
-
-
-
Remove the ribbon cable from the motherboard of the controller and place the top half of the controller on the side for later.
-
-
-
-
Lift the clear plastic piece out of the controller by pulling into the controller and removing it.
-
-
-
Remove the two 6 mm Phillips screws that are on top of the PCB of the charging port.
-
-
-
Gently wiggle the charging port's PCB side to side until it detaches from the controller.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
6 участников успешно повторили данное руководство.
Команда
York University, Team P-10, Allen Fall 2022 Участник York University, Team P-10, Allen Fall 2022
YORK-ALLEN-F22SPG10
1 член
Автор 2 руководств
