Введение

Over time, your DualShock 4 controller will probably be dropped, stepped on, or even thrown. The plastic shell helps to protect the internal components of the controller, but eventually, you might find that this protective shell needs to be replaced or re-aligned. This step-by-step process will show you how to fix this problem yourself.

  1. To remove the plastic shell, use the Phillips #00 Screwdriver to remove the four 6.0 mm screws securing the back of the controller.
    • To remove the plastic shell, use the Phillips #00 Screwdriver to remove the four 6.0 mm screws securing the back of the controller.

  2. The plastic shell is held in place by little plastic tabs that snap together.
    • The plastic shell is held in place by little plastic tabs that snap together.

    • Wedge the plastic opening tool between the shell and the controller and carefully pry off the plastic.

    • Take your time on this step. You do not want to break any plastic pieces.

  3. Free shipping on all orders over 100,00 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин

    Ever fixed something? That’s Genius.

    Share your story with #ImAGenius for a chance to win $100!

    We Are All Geniuses

    Share your repair story with #ImAGenius

  4. Either re-align the old plastic shell, or align a new replacement shell with the controller. The little plastic tabs that snap together should be aligned.
    • Either re-align the old plastic shell, or align a new replacement shell with the controller. The little plastic tabs that snap together should be aligned.

    • Apply pressure on the plastic housing so that it clicks together.

  5. Using the Phillips #00 Screwdriver, replace and tighten the four 6.0 mm screws on the back of the controller.
    • Using the Phillips #00 Screwdriver, replace and tighten the four 6.0 mm screws on the back of the controller.

Заключение

To reassemble your device, follow these instructions in reverse order.

21 участников успешно повторили данное руководство.

Dustin

Участник с: 12.03.2014

966 Репутация

Автор 5 руководств

Команда

University of Maryland, Team 6-2, Vijaybhaskar Spring 2014 Member of University of Maryland, Team 6-2, Vijaybhaskar Spring 2014

UMD-VIJAYBHASKAR-S14S6G2

4 членов

Автор 8 руководств

Комментариев: 2

can you go over the removal of the shell in detail? this barely teaches anything at all

Matt Law - Ответить

Nice job, you taught us how to take the screws off the controller. Congratulations!!!

Jason Yabes - Ответить

Просмотр статистики:

За 24 часа: 20

За 7 дней: 150

За 30 дней: 687

За всё время: 41,768