Перейти к основному содержанию

EVGA x17 Clicker Replacement

Выберете то, что вам нужно

  1. EVGA x17 Clicker Replacement, Clicker: шаг 1, изображение 1 из 1
    • Remove the mouse skates to reveal 5 screws.

  2. EVGA x17 Clicker Replacement: шаг 2, изображение 1 из 1
    • Use a Phillips head screwdriver to remove the 5 screws that secure the bottom panel.

  3. EVGA x17 Clicker Replacement: шаг 3, изображение 1 из 1
    • Remove the weight chamber cover.

  4. EVGA x17 Clicker Replacement: шаг 4, изображение 1 из 1
    • Slowly slide a spudger into and around the bottom of the panel, prying until a "popping" sound is heard.

  5. EVGA x17 Clicker Replacement: шаг 5, изображение 1 из 2 EVGA x17 Clicker Replacement: шаг 5, изображение 2 из 2
    • Remove the 13 screws on the interior.

    • There are 2 Phillips truss-head tapping screws, large circular heads, and the 11 Phillips screws from the interior.

  6. EVGA x17 Clicker Replacement: шаг 6, изображение 1 из 1
    • Carefully slide the middle section out.

  7. EVGA x17 Clicker Replacement: шаг 7, изображение 1 из 1
    • Remove the two screws from each clicker.

  8. EVGA x17 Clicker Replacement: шаг 8, изображение 1 из 1
    • Pop and slide out each clicker that needs to be replaced.

    • Clickers may need to be tugged forward in their slots to slide out.

    • Be extra careful removing clickers because the attachments are fragile.

Заключение

To reassemble your device, follow these instructions in reverse order.

Sydney Puett

Участник с: 09/13/23

569 Репутация

Автор 3 руководств

Команда

University of Colorado Denver, Team 1-4, Campeau Fall 2023 Участник University of Colorado Denver, Team 1-4, Campeau Fall 2023

UCDENVER-CAMPEAU-F23S1G4

7 членов

Автор 6 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 2

За последние 30 дней: 12

За всё время: 101