Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Введение

For this repair guide, I will instruct the user on replacing the clock's Bell Hammer. Some people use the alarm clock for reasons other than telling time. They use the clock's alarm to remind them of something or to wake them up at a certain time in the morning or evening. The Bell Hammer is located on top of the clock between the two bells. When the alarm goes off, it strikes the two bells in a rapid motion. To replace the Bell Hammer, the user must remove the back of the clock in order to get inside the clock's inner apparatus. From there, the user can remove the bell hammer.

Запчасти

Детали не указаны.

  1. Using a Phillip's Screwdriver, remove the three screws on the back cover of the clock. Using a Phillip's Screwdriver, remove the three screws on the back cover of the clock. Using a Phillip's Screwdriver, remove the three screws on the back cover of the clock.
    • Using a Phillip's Screwdriver, remove the three screws on the back cover of the clock.

  2. Using your hands, remove the back cover of the clock by grasping it and pulling it upwards.
    • Using your hands, remove the back cover of the clock by grasping it and pulling it upwards.

  3. LCD iPhone Screen Fix Kits

    The budget option, covered by our Lifetime Warranty.

    Shop Kits

    LCD iPhone Screen Fix Kits

    Cut repair costs, not quality.

    Shop Kits
  4. Using a Phillips Screwdriver, remove the Cellinoid Cover from inner clock apparatus. Using a Phillips Screwdriver, remove the Cellinoid Cover from inner clock apparatus.
    • Using a Phillips Screwdriver, remove the Cellinoid Cover from inner clock apparatus.

  5. Using your fingers, remove the bell hammer from the inner apparatus of clock. Using your fingers, remove the bell hammer from the inner apparatus of clock.
    • Using your fingers, remove the bell hammer from the inner apparatus of clock.

  6. Remove the clock's bell hammers and you are finished. Be sure to replace the old bell hammers with new ones.
    • Remove the clock's bell hammers and you are finished. Be sure to replace the old bell hammers with new ones.

    • Starting from Step 5, repeat each previous step to reassemble the clock.

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

Michael Johnson

Участник с: 03.11.2014

300 Репутация

Автор 2 руководств

Команда

Eastern Washington University, Team 1-6, Carnegie Fall 2014 Участник Eastern Washington University, Team 1-6, Carnegie Fall 2014

EWU-CARNEGIE-F14S1G6

6 членов

Автор 6 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 4

За последние 30 дней: 20

За всё время: 1,815