Fisher Paykel Neopuff Valve System Replacement

Введение

NOTE: The valves are an integral part of the valve, panel and manifold assembly and are not able to be serviced. Please specify the model number from the parts list (section 4.1.2) when ordering a replacement valve assembly.

Please reference the parts list below for the disassembly diagram.

Please refer to page 7 of the device’s Technical Manual for source information.

Выберете то, что вам нужно

Шаг 1 Valve System

Fisher Paykel Neopuff Valve System Replacement, Valve System: шаг 1, изображение 1 из 1

Remove the back cover, fixed by four screws.

Редактировать

Шаг 2

Disconnect the tube from the manometer.

Редактировать

Шаг 3

Remove the manometer by unscrewing the two retaining nuts.

Редактировать

Шаг 4

Fit the existing manometer into the new valve assembly panel.

Редактировать

Шаг 5

Tighten the retaining nuts.

Редактировать

Шаг 6

Reconnect the manometer tube.

Редактировать

Шаг 7

Refit the front panel to the back cover with the four screws from step 1.

Редактировать

Шаг 8

Carry out the valve system performance test described above. It is recommended to record the lot number of the new valve assembly onto the Set-up and Maintenance Checklist.

Редактировать