Перейти к основному содержанию

Fugoo Tough Device Speaker cover/Shell Replacement

Выберете то, что вам нужно

  1. Fugoo Tough Device Speaker cover/Shell Replacement, Device Speaker/Shell: шаг 1, изображение 1 из 2 Fugoo Tough Device Speaker cover/Shell Replacement, Device Speaker/Shell: шаг 1, изображение 2 из 2
    • Begin by unscrewing the four 10.72mm corner screws using the Hex 2.0 screwdriver.

  2. Fugoo Tough Device Speaker cover/Shell Replacement: шаг 2, изображение 1 из 1
    • Using the Hex 1.5 screwdriver remove remaining 6-5.79mm screws on the front of the speaker.

  3. Fugoo Tough Device Speaker cover/Shell Replacement: шаг 3, изображение 1 из 1
    • Pull front part of shell away from back part of shell.

Заключение

To reassemble your device, follow these instructions in reverse order.

Daniel

Участник с: 01/19/17

317 Репутация

Автор 3 руководств

Команда

Eastern Washington University, Team 1-2, Mathisen Winter 2017 Участник Eastern Washington University, Team 1-2, Mathisen Winter 2017

EWU-MATHISEN-W17S1G2

4 членов

Автор 5 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 2

За всё время: 224