Введение

The goal of this guide is to show how to replace RAM in the Fujitsu Lifebook T1010.

Запчасти

Никакие детали не требуются.

  1. Remove the two Phillips #0 screws from the cover.
    • Remove the two Phillips #0 screws from the cover.

  2. Remove the cover.
    • Remove the cover.

    • Two clips secure the RAM module in place, one on each side. Using your fingers, spread the clips away from the RAM module.


      • When released, the RAM module will pop up at a slight angle.

    • Lift the RAM module to an angle of about 30 degrees and slide it out.

Заключение

To reassemble your device, follow these instructions in reverse order.

Chitara Smith

Участник с: 24.01.2018

575 Репутация

Автор 3 руководств

Команда

Gateway, Team S1-G3, Johnson Spring 2018 Member of Gateway, Team S1-G3, Johnson Spring 2018

GCC-JOHNSON-S18S1G3

2 членов

Автор 3 руководств

Комментариев: 0

Просмотр статистики:

За 24 часа: 0

За 7 дней: 1

За 30 дней: 4

За всё время: 42