Перейти к основному содержанию

Введение

A repair manual for the Fujitsu Siemens Amilo Pro 2010 and 2020 and 2030 which shows you how to replace the keyboard!

Запчасти

Детали не указаны.

  1. Fujitsu Siemens Amilo Pro Keyboard Replacement, Keyboard: step 1, image 1 of 1
    • Remove AC adapter and battery.

    • Battery: pull the latch with a battery symbol beside it.

  2. Fujitsu Siemens Amilo Pro Keyboard Replacement: step 2, image 1 of 1
    • Use a flat head screwdriver to pry out the hinge cover.

    • (Caution do not pull to hard as this could snap the plastic!)

  3. Fujitsu Siemens Amilo Pro Keyboard Replacement: step 3, image 1 of 1
    • Remove the one screw holding in the keyboard.

  4. Fujitsu Siemens Amilo Pro Keyboard Replacement: step 4, image 1 of 1
    • Pull the keyboard up towards you.

  5. Fujitsu Siemens Amilo Pro Keyboard Replacement: step 5, image 1 of 1
    • Pull the ribbon cable and the keyboard will come out.

    • (Caution this ribbon is very delicate)

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Jeremy Scalpello

Участник с: 25.04.2010

282 Репутация

1 руководство автора

Один комментарий

try to focus the image while taking the picture so people can understand better were to touch

storm builder - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 13

За всё время: 15,079