Введение
The fresh food evaporator cover is held to the back wall of the refrigerator with a Phillips-head screw and 2 tabs.
Выберете то, что вам нужно
-
-
Remove the 2 fruit and vegetable drawers and the shelves that are in front of the evaporator cover.
-
-
-
Using a small flat blade screwdriver, pry off the cap from the top of the shelf angle.
-
Remove the 2 Phillips-head screws that attach the shelf angle to the cover.
-
-
-
-
Remove the 2 Phillips-head screws that hold the evaporator cover to the back wall.
-
Grasp the shelf angle near the bottom and pull it out and down.
-
Pull the cover out at the bottom, then lower the cover.
-
-
-
Turn the front of the cover towards the icemaker and disconnect the evaporator fan motor wire harness.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
