Перейти к основному содержанию

Введение

The only prerequisite for the WiFi card is the Base Cover.

Запчасти

No parts specified.

  1. Remove the five identical 3/16" Phillips screws that secures the hard drive and memory cover using a Phillips #0 Screwdriver.
    • Remove the five identical 3/16" Phillips screws that secures the hard drive and memory cover using a Phillips #0 Screwdriver.

  2. Lift up the base cover from the the top with your hands to a 90 degree angle.
    • Lift up the base cover from the the top with your hands to a 90 degree angle.

    • Remove the base cover and place it in a safe and dry place.

  3. Remove the 3/16" screw located at the bottom left corner of the WiFi card using a Phillips #0 Screwdriver.
    • Remove the 3/16" screw located at the bottom left corner of the WiFi card using a Phillips #0 Screwdriver.

  4. Locate the black and white cables attached to the WiFi card.
    • Locate the black and white cables attached to the WiFi card.

    • Gently wiggle the black cable until it detaches from the WiFi card.

    • Repeat the previous step for the white cable.

  5. Gently, remove the Wifi card from its slot, and place it in a dry and safe place.
    • Gently, remove the Wifi card from its slot, and place it in a dry and safe place.

Заключение

To reassemble your device, follow these instructions in reverse order.

Ruben

Участник с: 22.04.2014

280 Репутация

Автор 2 руководств

Команда

Cal Poly, Team 7-24, Regan Spring 2014 Member of Cal Poly, Team 7-24, Regan Spring 2014

CPSU-REGAN-S14S7G24

4 членов

Автор 9 руководств

Добавить комментарий

Просмотр статистики:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

За всё время: 957