Перейти к основному содержанию

Gateway SA1 Wireless Card Replacement

Выберете то, что вам нужно

  1. Gateway SA1 Wireless Card Replacement, Wireless Card: шаг 1, изображение 1 из 1
    • The first thing you need to do is remove the panel concealing the wireless card, by taking out the screws.

  2. Gateway SA1 Wireless Card Replacement: шаг 2, изображение 1 из 1
    • Locate the wireless card on the right side of the now removed panel.

  3. Gateway SA1 Wireless Card Replacement: шаг 3, изображение 1 из 1
    • Remove the screws in the two possible locations.

  4. Gateway SA1 Wireless Card Replacement: шаг 4, изображение 1 из 1
    • After removing the screws, gently pull upwards on the end of the wireless card until it is angled as shown.

  5. Gateway SA1 Wireless Card Replacement: шаг 5, изображение 1 из 1
    • Pull the card diretly outward from its socket, all while being mindful of the connected wires.

    • Remove the wired connections by gently pulling them diretly away from the card. Please remember where each one was connected, it will be useful for reconnecting

    • Reconnect wires to new wireless card and screw back into place.

Заключение

To reassemble your device, follow these instructions in reverse order.

Shawn Cabral

Участник с: 03/12/14

463 Репутация

Автор 4 руководств

Команда

UMass Dartmouth, Team 5-4, Cichon Spring 2014 Участник UMass Dartmouth, Team 5-4, Cichon Spring 2014

UMASSD-CICHON-S14S5G4

3 членов

Автор 8 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 4

За всё время: 649