Перейти к основному содержанию

Введение

The shell on the RC Mustang GT is mostly a cosmetic component, giving the car the unique appearance associated with GEAR'D UP's RC cars. The following steps will show how to replace the shell of the car.

Запчасти

No parts specified.

  1. Flip the car over and remove the four 5mm Phillips #0 screws that hold the shell to the car chassis. Flip the car over and remove the four 5mm Phillips #0 screws that hold the shell to the car chassis.
    • Flip the car over and remove the four 5mm Phillips #0 screws that hold the shell to the car chassis.

  2. Flip the car over again to its upright position and vertically lift the shell from the car.
    • Flip the car over again to its upright position and vertically lift the shell from the car.

    • During re-assembly, make sure the shell is correctly aligned. If it is not aligned correctly, it may rub on the wheels, possibly preventing them from turning.

Заключение

To reassemble your device, follow these instructions in reverse order.

Claudia Robinson

Участник с: 01.02.2015

419 Репутация

Автор 3 руководств

Команда

Cal Poly, Team 8-38, Amido Winter 2015 Member of Cal Poly, Team 8-38, Amido Winter 2015

CPSU-AMIDO-W15S8G38

4 членов

Автор 8 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 153