Ghost Longboard Wheel Replacement

Введение

Use this guide to replace the damaged, warped, or dented wheels on your Ghost Longboard. This guide requires minimal skill and no prior experience. It is especially useful if your board is not as fast as it used to be, it has become more difficult to turn, or it does not coast for as long as you would like it to. the ghost longboard wheels are easy to replace.

Выберете то, что вам нужно

Шаг 1 Wheel

Ghost Longboard Wheel Replacement, Wheel: шаг 1, изображение 1 из 1

Using a 15 mm socket wrench, unscrew the axle nut.

Редактировать

Шаг 2

Using your fingers, remove the axle nut from the axle.

Редактировать

Шаг 3

Remove the washer from the axle.

Редактировать

Шаг 4

Remove the wheel from the axle.

Редактировать

Шаг 5

Remove the second washer from the axle.

Редактировать

Шаг 6

Slide a new washer onto the axle.

Редактировать

Шаг 7

Place the new wheel on the axle.
Be sure to position the flat side of the wheel so it is facing inward.

Редактировать

Шаг 8

Place a second washer on the axle exterior to the wheel.

Редактировать

Шаг 9

Place an axle nut on the axle.

Редактировать

Шаг 10

Using a 15 mm socket wrench, tighten the axle nut.
Be sure to tighten the axle nut enough to prevent the wheel from wobbling, but not so tight as to prohibit the wheel from spinning freely.

Редактировать