Перейти к основному содержанию

HMDX Chill Motherboard Replacement

Выберете то, что вам нужно

  1. HMDX Chill Motherboard Replacement, Remove Rubber Base: шаг 1, изображение 1 из 3 HMDX Chill Motherboard Replacement, Remove Rubber Base: шаг 1, изображение 2 из 3 HMDX Chill Motherboard Replacement, Remove Rubber Base: шаг 1, изображение 3 из 3
    • Insert a metal spudger under the rubber base.

    • Pry the rubber base off.

  2. HMDX Chill Motherboard Replacement: шаг 2, изображение 1 из 1
    • Use a Phillips #1 screwdriver to remove four 9 mm screws from the base of the device.

  3. HMDX Chill Motherboard Replacement: шаг 3, изображение 1 из 2 HMDX Chill Motherboard Replacement: шаг 3, изображение 2 из 2
    • Grip the base of the HMDX Chill.

    • Pull the base upwards.

  4. HMDX Chill Motherboard Replacement, Motherboard: шаг 4, изображение 1 из 3 HMDX Chill Motherboard Replacement, Motherboard: шаг 4, изображение 2 из 3 HMDX Chill Motherboard Replacement, Motherboard: шаг 4, изображение 3 из 3
    • Use a Phillips #1 screwdriver to remove the four 6 mm screws that secure the motherboard to the base of the device.

  5. HMDX Chill Motherboard Replacement: шаг 5, изображение 1 из 1
    • Pull the motherboard away from the base gently.

    • Do not pull too hard on the motherboard. It is still attached to the base by wires.

  6. HMDX Chill Motherboard Replacement: шаг 6, изображение 1 из 3 HMDX Chill Motherboard Replacement: шаг 6, изображение 2 из 3 HMDX Chill Motherboard Replacement: шаг 6, изображение 3 из 3
    • Use a soldering iron to desolder the wires connecting the motherboard to the case.

  7. HMDX Chill Motherboard Replacement: шаг 7, изображение 1 из 2 HMDX Chill Motherboard Replacement: шаг 7, изображение 2 из 2
    • Insert the spudger between the case and the wire and move the spudger upwards.

    • This will cause the case to prop open.

    • The wire behind the motherboard will now be visible. Pull this out from behind.

  8. HMDX Chill Motherboard Replacement: шаг 8, изображение 1 из 1
    • Use the soldering iron to desolder the wires connecting the motherboard to the base of the HMDX Chill.

Заключение

To reassemble your device, follow these instructions in reverse order.

Jourdan Holubasch

Участник с: 03/31/16

759 Репутация

Автор 7 руководств

Команда

EWU-Giguere-S16S1G1 Участник EWU-Giguere-S16S1G1

Community

4 членов

Автор 7 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 6

За всё время: 387