Введение
If your device is over heating excessively, and running loudly, the fan may need to be replaced. Follow this guide to correctly remove it.
Выберете то, что вам нужно
-
-
Using a Phillips #000 screwdriver, remove the eleven 10 mm screws located on the underside of the laptop, that are holding the back panel in place.
-
-
-
-
Using a Phillips #000 screwdriver remove the 5mm screw holding the fan in place.
-
-
-
After the screw is removed, carefully unplug the set of wires with one of each colored, red, black, yellow, and blue, from the white connector it is secured at.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.