Введение
To remove the fan, first the keyboard must be removed as well as other components such as the display.
Выберете то, что вам нужно
-
-
Locate and unscrew the two screws on the back marked with a small keyboard. These screws hold the keyboard in place.
-
Locate the metal hooks where the keyboard connects to the laptop and use a metal spudger to gently pry up the keyboard.
-
-
-
Turn the laptop over so that you see the bottom.
-
Locate the twenty 3 mm Phillips head screws.
-
Unscrew them using the PH0 screwdriver
-
-
-
After unscrewing the 3 mm screws, remove the hard drive covering by lifting upward.
-
-
-
-
Unhook the two wires connecting to the wireless card by gently pulling them out.
-
-
-
Locate the power button connector wire. (This can be found where the keyboard sits.)
-
Using the tweezers, unhook the wire.
-
-
-
Press and hold the lock to pop the panel piece above the keyboard and pull up to remove it.
-
-
-
Locate the four 3 mm Phillips head screws.
-
Unscrew them using the PH0 screwdriver.
-
-
-
Locate the disk drive on the side of the device.
-
Remove it by pulling it all the way out.
-
-
-
Use the PH0 screwdriver to remove the two 3 mm Phillips head screws in the disk drive port.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
Еще один человек закончил это руководство.
Команда
UMass Dartmouth, Team 5-6, Martin Fall 2016 Участник UMass Dartmouth, Team 5-6, Martin Fall 2016
UMASSD-MARTIN-F16S5G6
3 членов
Автор 6 руководств
