Перейти к основному содержанию

HP Compaq Presario V6000 Wifi antenna card Replacement

Выберете то, что вам нужно

  1. HP Compaq Presario V6000 Wifi antenna card Replacement, Wifi antenna card: шаг 1, изображение 1 из 1
    • Grab a Type-Cross #1 screwdriver and unscrew the 3 screws and take off the cover of the wifi antenna card.

  2. HP Compaq Presario V6000 Wifi antenna card Replacement: шаг 2, изображение 1 из 1
    • Use your finger tips to pry off the gray antenna connections.

    • Be careful to not pull the antenna wire too hard, you may cause damage to the connection permanently and/or motherboard.

    • The screwdriver is only being use to demonstrate which wire to remove. The screwdriver can potentially damage the motherboard if used improperly.

  3. HP Compaq Presario V6000 Wifi antenna card Replacement: шаг 3, изображение 1 из 1
    • After removing the connection cable, remove the two screws that hold the wireless card to the motherboard.

    • Then gently remove card without causing any damage to card itself or surrounding parts.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Hunter Griffin

Участник с: 10/11/16

104 Репутация

1 руководство автора

Команда

Texas Tech, Team 38-4, Bennett Fall 2016 Участник Texas Tech, Team 38-4, Bennett Fall 2016

TTU-BENNETT-F16S38G4

4 членов

Автор 4 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 2

За последние 7 дней: 4

За последние 30 дней: 11

За всё время: 698