Перейти к основному содержанию

Введение

Use this guide to replace the home button in your HP ElitePad 900.

  1. Unscrew the two 2.8mm Phillips #000 screws near the power connector.
    • Unscrew the two 2.8mm Phillips #000 screws near the power connector.

  2. Use a suction cup to pull the display assembly up. Use a suction cup to pull the display assembly up.
    • Use a suction cup to pull the display assembly up.

  3. Use the tip of a spudger to disconnect the two display ZIF connectors. Use the tip of a spudger to disconnect the two display ZIF connectors.
    • Use the tip of a spudger to disconnect the two display ZIF connectors.

  4. Remove the two 2.4mm Phillips #000 screws.
    • Remove the two 2.4mm Phillips #000 screws.

  5. Lift metal bracket along with blue connector.
    • Lift metal bracket along with blue connector.

  6. Replace connector.
    • Replace connector.

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Kyle Marques

Участник с: 03.09.2015

769 Репутация

Автор 6 руководств

Команда

USF Tampa, Team 12-4, Blackwell Fall 2015 Member of USF Tampa, Team 12-4, Blackwell Fall 2015

USFT-BLACKWELL-F15S12G4

4 членов

Автор 6 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 3

За всё время: 469