Перейти к основному содержанию

Введение

Use this guide to replace the speakers in your HP ElitePad 900.

  1. Unscrew the two 2.8mm Phillips #000 screws near the power connector.
    • Unscrew the two 2.8mm Phillips #000 screws near the power connector.

  2. Use a suction cup to pull the display assembly up. Use a suction cup to pull the display assembly up.
    • Use a suction cup to pull the display assembly up.

  3. Use the tip of a spudger to disconnect the two display ZIF connectors. Use the tip of a spudger to disconnect the two display ZIF connectors.
    • Use the tip of a spudger to disconnect the two display ZIF connectors.

  4. Android Fix Kits

    A new screen or battery is one kit away.

    Купить сейчас

    Android Fix Kits

    A new screen or battery is one kit away.

    Купить сейчас
  5. Remove the eight  2.4mm Phillips #000 screws. Remove the eight  2.4mm Phillips #000 screws. Remove the eight  2.4mm Phillips #000 screws.
    • Remove the eight 2.4mm Phillips #000 screws.

  6. Gently use tweezers to disconnect the indicator wire.
    • Gently use tweezers to disconnect the indicator wire.

  7. Lift the charging port over the left speaker. Lift the charging port over the left speaker. Lift the charging port over the left speaker.
    • Lift the charging port over the left speaker.

  8. Slightly lift the green PCB to slide out the right speaker. Replace the speakers. Replace the speakers.
    • Slightly lift the green PCB to slide out the right speaker.

    • Replace the speakers.

Заключение

To reassemble your device, follow these instructions in reverse order.

Kyle Marques

Участник с: 03.09.2015

769 Репутация

Автор 6 руководств

Команда

USF Tampa, Team 12-4, Blackwell Fall 2015 Member of USF Tampa, Team 12-4, Blackwell Fall 2015

USFT-BLACKWELL-F15S12G4

4 членов

Автор 6 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 1

За 7 дней: 6

За 30 дней: 13

За всё время: 641