Введение
The replacement of LCD screen will require a T10 and a T6 screwdriver.
Выберете то, что вам нужно
-
-
-
Remove the large flat ribbon cable by pinching the top and bottom of the cable between thumb and index finger and pulling away from the mother board.
-
Remove the small flat ribbon cable by pinching the top and bottom of the cable between thumb and index finger and pulling away from the mother board.
-
-
-
Remove the four T6, 7 mm mounting screws.
-
Remove the LCD screen out of the plastic housing.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
Еще один человек закончил это руководство.
Команда
Eastern Washington University, Team S1-G6, Carnegie Fall 2018 Участник Eastern Washington University, Team S1-G6, Carnegie Fall 2018
EWU-CARNEGIE-F18S1G6
4 членов
Автор 13 руководств
