Перейти к основному содержанию

HP Envy 700-030qe RAM Replacement

Выберете то, что вам нужно

  1. HP Envy 700-030qe RAM Replacement, RAM: шаг 1, изображение 1 из 3 HP Envy 700-030qe RAM Replacement, RAM: шаг 1, изображение 2 из 3 HP Envy 700-030qe RAM Replacement, RAM: шаг 1, изображение 3 из 3
    • Make sure that you are wearing your anti-static wristband. This will prevent damaging any internal parts with any built up static electricity.

    • Unscrew the 10.5mm screw on the left of the desktop using your hand.

    • If it is too tight you may use a torx-head screwdriver or a flat-head screwdriver.

  2. HP Envy 700-030qe RAM Replacement: шаг 2, изображение 1 из 2 HP Envy 700-030qe RAM Replacement: шаг 2, изображение 2 из 2
    • You can now slide off the side panel of the desktop.

    • You should now have an opening on the side of your computer as shown in the second picture.

    • The location of the RAM is highlighted in red.

  3. HP Envy 700-030qe RAM Replacement: шаг 3, изображение 1 из 2 HP Envy 700-030qe RAM Replacement: шаг 3, изображение 2 из 2
    • Undo the clips on each end of the chip as shown in the second picture.

    • Then you may carefully remove the RAM chips by pulling them out by their the ends.

    • Make sure you pull the chips out by the ends and not grabbing the entire thing. This may damage the chips.

    • Remember the slots that you take the RAM chips from. You must put the two replacement chips in the same slots.

Заключение

To reassemble your device, follow these instructions in reverse order.

Sam Wheeler

Участник с: 10/01/15

225 Репутация

1 руководство автора

Команда

Cal Poly, Team 5-9, Maness Fall 2015 Участник Cal Poly, Team 5-9, Maness Fall 2015

CPSU-MANESS-F15S5G9

4 членов

Автор 10 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 4

За последние 7 дней: 10

За последние 30 дней: 19

За всё время: 697