Введение

This guide will show you how to replace the headphone jack for the HP Envy TouchSmart 4-1216dx. Before removing the jack, the Back Panel and Fan of the device must be removed.

Запчасти

Никакие детали не требуются.

  1. Remove the thirteen Phillips #0 screws. Remove the thirteen Phillips #0 screws.
    • Remove the thirteen Phillips #0 screws.

  2. Pull the panel up and off to remove from the laptop. Pull the panel up and off to remove from the laptop.
    • Pull the panel up and off to remove from the laptop.

  3. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  4. Unplug the fan from the motherboard.
    • Unplug the fan from the motherboard.

  5. Remove the four Phillips #0 screws holding in the fan. Pull out the fan.
    • Remove the four Phillips #0 screws holding in the fan.

    • Pull out the fan.

  6. Unplug bus from motherboard
    • Unplug bus from motherboard

  7. Remove the two Phillips #0 screws that hold the headphone jack to the laptop.
    • Remove the two Phillips #0 screws that hold the headphone jack to the laptop.

    • Pull out to remove.

Заключение

To reassemble your device, follow these instructions in reverse order.

Gabriel Castro

Участник с: 21.02.2018

175 Репутация

Автор 2 руководств

Команда

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 1

За 30 дней: 1

За всё время: 59