Перейти к основному содержанию

HP Envy m6-k022dx Speaker Replacement

Выберете то, что вам нужно

  1. HP Envy m6-k022dx Speaker Replacement, Lower Case: шаг 1, изображение 1 из 1
    • There are 12 phillips head screws which need to be unscrewed before removing the backplate of the laptop.

  2. HP Envy m6-k022dx Speaker Replacement: шаг 2, изображение 1 из 1
    • Next, use a size PH1 Philips head screw driver to remove the screws.

  3. HP Envy m6-k022dx Speaker Replacement: шаг 3, изображение 1 из 1
    • Then, use a prying tool to help uncouple the backplate.

  4. HP Envy m6-k022dx Speaker Replacement: шаг 4, изображение 1 из 1
    • Finally, use both hands to lift up and take off the back plate of the computer.

  5. HP Envy m6-k022dx Speaker Replacement, Speaker: шаг 5, изображение 1 из 1
    • Remove the two screws holding the speaker in place.

    • There are two red rubber grommets which stay situated in the screw guide holes; be sure not to lose these.

  6. HP Envy m6-k022dx Speaker Replacement: шаг 6, изображение 1 из 1
    • Once the screws have been removed, gently lift the speaker straight up, but just enough to dislodge it.

    • There is a cable connecting the speakers to the sound board. Be sure to not tug on this connection when lifting the speaker.

  7. HP Envy m6-k022dx Speaker Replacement: шаг 7, изображение 1 из 1
    • Once the speaker is dislodged, gently pull the connecting cable from the sound card.

    • The speaker is now fully removed and ready to be replaced.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Kareem Rigaud

Участник с: 03/02/17

403 Репутация

Автор 3 руководств

Команда

USF Tampa, Team S13-G6, Cagle Spring 2017 Участник USF Tampa, Team S13-G6, Cagle Spring 2017

USFT-CAGLE-S17S13G6

3 членов

Автор 6 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 2

За последние 30 дней: 11

За всё время: 671