Перейти к основному содержанию

Введение

This guide is an internal prereq only.

Инструменты

Запчасти

Детали не указаны.

  1. HP Mini 1000 Camera Board Cable Replacement, Camera Board Cable: step 1, image 1 of 1
    • Use the sharp end of a spudger to flip up the plastic flap that rests on top of the camera board cable ZIF socket.

  2. HP Mini 1000 Camera Board Cable Replacement: step 2, image 1 of 2 HP Mini 1000 Camera Board Cable Replacement: step 2, image 2 of 2
    • Use your fingernail or the sharp end of a spudger to flip up the retaining flap on the camera board cable ZIF socket.

    • Be sure you are prying up on the retaining flap, not the socket itself.

    • Pull the camera board ribbon cable out of its socket.

Заключение

To reassemble your device, follow these instructions in reverse order.

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 18