Введение
This guide will provide instructions on how to disassemble the HP Pavilion tx2500 in order to replace the screen rotator.
Выберете то, что вам нужно
-
-
Completely turn off and unplug device. Lay the device bottom side up on a soft surface.
-
-
-
Squeeze the latches on the battery until you hear a click. Slide out the battery.
-
-
-
Using the Phillips #0 screwdriver, remove the 4.5 mm screw from the WLAN model screen.
-
Once unscrewed, lift the right side of the WLAN module compartment cover and swing it to the left.
-
-
-
Using the plastic opening tool, disconnect the WLAN antenna cables from the WLAN module.
-
-
-
-
Using the Phillips #0 screwdriver, unscrew the 4.5 mm screw from the middle section in the battery compartment.
-
-
-
Flip the laptop front side up and then use your fingers to lift up the keyboard.
-
-
-
Lift up the black latch that connects the film strip to the base of the computer.
-
Use the plastic opening tool to disconnect the film strip from the base of the computer.
-
-
-
Rotate the screen back towards you.
-
Lift up the convertible hinge to unclip it from the base of the computer.
-
-
-
Using the Phillips #0 screwdriver, remove both of the 5.0 mm screws on the base of the rotator.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Команда
Sam Houston State, Team 1-4, Blackburne Fall 2015 Участник Sam Houston State, Team 1-4, Blackburne Fall 2015
SHSU-BLACKBURNE-F15S1G4
4 членов
Автор 5 руководств
