Перейти к основному содержанию

HP Split x2 Rear Cover Replacement

Выберете то, что вам нужно

  1. HP Split x2 Rear Cover Replacement, Rear Cover: шаг 1, изображение 1 из 1
    • Opening the device voids the manufacturer warranty.

    • Power down the HP Split x2 before beginning the repair

    • Separate the tablet from the keyboard by pushing the slider to the left and lifting the tablet from the keyboard.

  2. HP Split x2 Rear Cover Replacement: шаг 2, изображение 1 из 3 HP Split x2 Rear Cover Replacement: шаг 2, изображение 2 из 3 HP Split x2 Rear Cover Replacement: шаг 2, изображение 3 из 3
    • Remove the four white caps on the bottom edge of the tablet.

    • Use a tweezer to grasp white caps.

    • The white caps are easily lost. Store them in a secure place.

  3. HP Split x2 Rear Cover Replacement: шаг 3, изображение 1 из 1
    • Use a Phillips #000 screwdriver to remove the four 3mm screws.

  4. HP Split x2 Rear Cover Replacement: шаг 4, изображение 1 из 2 HP Split x2 Rear Cover Replacement: шаг 4, изображение 2 из 2
    • Use a plastic opening tool to pry the tabs on the top, left and right sides of the tablet.

    • Only the top and sides have tabs. Remove all tabs before lifting screen.

  5. HP Split x2 Rear Cover Replacement: шаг 5, изображение 1 из 2 HP Split x2 Rear Cover Replacement: шаг 5, изображение 2 из 2
    • Separate the cover and the screen.

    • Gently lift the screen out of the cover.

Заключение

To reassemble your device, follow these instructions in reverse order.

6 участников успешно повторили данное руководство.

Ricky Huitema

Участник с: 09/24/15

449 Репутация

Автор 2 руководств

Команда

Texas Tech, Team 22-5, Rauch Fall 2015 Участник Texas Tech, Team 22-5, Rauch Fall 2015

TTU-RAUCH-F15S22G5

3 членов

Автор 2 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 8

За всё время: 3,851