Перейти к основному содержанию

HP Stream 8 Rear-facing camera Replacement

Выберете то, что вам нужно

  1. HP Stream 8 Rear-facing camera Replacement, Midframe: шаг 1, изображение 1 из 1
    • Use your nail or a spudger to pry the back cover off of the device.

  2. HP Stream 8 Rear-facing camera Replacement: шаг 2, изображение 1 из 1
    • Slide your finger around the rest of the back cover, lifting it completely off of the device.

  3. HP Stream 8 Rear-facing camera Replacement: шаг 3, изображение 1 из 1
    • Remove ten Phillips #00 screws from the inside cover.

  4. HP Stream 8 Rear-facing camera Replacement: шаг 4, изображение 1 из 1
    • Pry up the inside cover the same way as in the first step.

  5. HP Stream 8 Rear-facing camera Replacement, Rear-Facing Camera: шаг 5, изображение 1 из 1
    • Carefully pry up the gray metal piece on the end of the flex ribbon cable using tweezers.

  6. HP Stream 8 Rear-facing camera Replacement: шаг 6, изображение 1 из 1
    • Remove the back facing camera with the tweezers.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Nick Miller

Участник с: 04/11/16

669 Репутация

Автор 6 руководств

Команда

Cal Poly, Team 34-14, Maness Spring 2016 Участник Cal Poly, Team 34-14, Maness Spring 2016

CPSU-MANESS-S16S34G14

4 членов

Автор 12 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 2

За всё время: 211