Перейти к основному содержанию

HTC Desire 610 Charging Port Replacement

Выберете то, что вам нужно

  1. HTC Desire 610 Charging Port Replacement, Black Plastic Circuit Cover: шаг 1, изображение 1 из 3 HTC Desire 610 Charging Port Replacement, Black Plastic Circuit Cover: шаг 1, изображение 2 из 3 HTC Desire 610 Charging Port Replacement, Black Plastic Circuit Cover: шаг 1, изображение 3 из 3
    • Using a plastic opening tool, take off the back cover of the phone.

  2. HTC Desire 610 Charging Port Replacement: шаг 2, изображение 1 из 1
    • Remove the four black 4mm torx screws using the Torx T5 bit.

  3. HTC Desire 610 Charging Port Replacement: шаг 3, изображение 1 из 1
    • Remove the four silver 5mm torx head screws using the Torx T5 screwdriver.

  4. HTC Desire 610 Charging Port Replacement: шаг 4, изображение 1 из 1
    • Remove the two 2.5mm phillips head screws using the Phillips 000 screwdriver.

  5. HTC Desire 610 Charging Port Replacement: шаг 5, изображение 1 из 1
    • Remove the black plastic circuit cover using a plastic opening tool.

  6. HTC Desire 610 Charging Port Replacement, Charging Port: шаг 6, изображение 1 из 1
    • Remove the 4mm black Torx screw using a Torx T5 screwdriver.

  7. HTC Desire 610 Charging Port Replacement: шаг 7, изображение 1 из 1
    • Using a pair of tweezers, disconnect the antenna wire.

  8. HTC Desire 610 Charging Port Replacement: шаг 8, изображение 1 из 3 HTC Desire 610 Charging Port Replacement: шаг 8, изображение 2 из 3 HTC Desire 610 Charging Port Replacement: шаг 8, изображение 3 из 3
    • Peel back the gray adhesive strip using the precision tweezers.

  9. HTC Desire 610 Charging Port Replacement: шаг 9, изображение 1 из 1
    • Pull up on the white strip so it sits 90 degrees using a pair of precision tweezers.

  10. HTC Desire 610 Charging Port Replacement: шаг 10, изображение 1 из 3 HTC Desire 610 Charging Port Replacement: шаг 10, изображение 2 из 3 HTC Desire 610 Charging Port Replacement: шаг 10, изображение 3 из 3
    • Pry up the circuit board and pull it out using a pair of precision tweezers.

  11. HTC Desire 610 Charging Port Replacement: шаг 11, изображение 1 из 3 HTC Desire 610 Charging Port Replacement: шаг 11, изображение 2 из 3 HTC Desire 610 Charging Port Replacement: шаг 11, изображение 3 из 3
    • Remove the loud speaker using a pair of precision tweezers.

    • The loud speaker is attached with adhesive and may require more force than expected to remove.

    • The prongs on the speaker should be sticking up towards the top of the phone when you put the speaker on the new circuit board.

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

Kaycee Hammond

Участник с: 02/11/17

273 Репутация

Автор 2 руководств

Команда

IUPUI, Team S1-G1, Wilson Spring 2017 Участник IUPUI, Team S1-G1, Wilson Spring 2017

IUPUI-WILSON-S17S1G1

4 членов

Автор 6 руководств

Один комментарий

Добавить комментарий

Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 1

За последние 30 дней: 6

За всё время: 1,218