Введение

This guide will walk you through the steps necessary to access the power button on your HTC Evo 4G for replacement. The four steps require no special skills. There are small parts that could get lost easily upon removal if not handled carefully.

Запчасти

Никакие детали не требуются.

  1. Using the tip of your finger, lift the battery from the end closest to the camera.
    • Using the tip of your finger, lift the battery from the end closest to the camera.

    • Remove the battery from the rear inner frame.

    Добавить комментарий

  2. Remove the six screws on the back of your phone with the T5 screwdriver. Be careful not to lose the screws.
    • Remove the six screws on the back of your phone with the T5 screwdriver. Be careful not to lose the screws.

    Добавить комментарий

  3. Spread Fixmas Cheer
    Получите $12 за покупку от $50 и выше с промокодом FIXMAS12
    Spread Fixmas Cheer
    Получите $12 за покупку от $50 и выше с промокодом FIXMAS12
    • Use the plastic opening tool to gently pry the inner frame apart from the rest of the phone.

    • Lift off the inner frame from the rest of the phone to remove it.

    Добавить комментарий

    • Carefully remove the power button located at the top of the phone

    Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Sage Jurado

Участник с: 13.03.2014

864 Репутация

Автор 4 руководств

Команда

New Mexico State, Team 1-1, Easley Spring 2014 Member of New Mexico State, Team 1-1, Easley Spring 2014

NMSU-EASLEY-S14S1G1

5 членов

Автор 4 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 1

За всё время: 428