Введение

Remove 4 Torx screws and 2 #00 Philps

Запчасти

Никакие детали не требуются.

First remove the back cover of your phone to expose the battery.
  • First remove the back cover of your phone to expose the battery.

Добавить комментарий

Turn the phone over and remove the battery by using your thumb to push forward on the battery and then lift it.
  • Turn the phone over and remove the battery by using your thumb to push forward on the battery and then lift it.

Добавить комментарий

  • Take the battery out

  • When reassembling, make sure that the battery contacts match up.

Добавить комментарий

  • Remove the four 4.9mm T6 Torx screws that secure the back panel to the rest of the phone

Добавить комментарий

  • Remove the two 4.3mm #00 Phillips screws that secure the back panel to the rest of the phone

Добавить комментарий

  • Use the plastic opening tool to pry the clips off

  • Insert the plastic opening tool along the seams at different points to it pry up

  • This may require a bit of force. The USB port cover may fall off in this step.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Andrew Van Meter

Участник с: 06.10.2011

24 Репутация

Автор 3 руководств

Команда

Cal Poly, Team 20-29, Maness Fall 2011 Member of Cal Poly, Team 20-29, Maness Fall 2011

CPSU-MANESS-F11S20G29

4 членов

Автор 9 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 706