Введение

Replacement of the HTC Touch Pro's usb logic board.

Запчасти

Никакие детали не требуются.

  1. First, gently press on the back plate and push down toward the camera.
    • First, gently press on the back plate and push down toward the camera.

    Добавить комментарий

  2. Use your finger to lift up the edge of the battery.
    • Use your finger to lift up the edge of the battery.

    Добавить комментарий

    • Remove the 4 screws using the T6 screw driver.

    Добавить комментарий

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Lift the plastic cover near the memory card slot.

    Добавить комментарий

    • Remove the two Phillips #00 screws from the backside of the screen.

    Добавить комментарий

    • Insert a spudger or a plastic opening tool into the seam on the side of the phone.

    • Gently pry apart the two halves of the phone.

    Добавить комментарий

    • Gently unplug the connectors.

    • Remove the screws with a 00 Phillips-head screwdriver.

    Which screws in red? There aren't any.

    Calion - Ответить

    They are marked up in red in the second picture.

    Jake Devincenzi -

    • Gently lift the logic board up using a plastic opener tool.

    • BE AWARE OF THE ANTENNA.

    Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Zhaowei Zhang

Участник с: 28.04.2011

112 Репутация

Автор 4 руководств

Команда

CSU Los Angeles, Team 1-6, Nelson Spring 2011 Member of CSU Los Angeles, Team 1-6, Nelson Spring 2011

CSULA-NELSON-S11S1G6

3 членов

Автор 4 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 2,905