Выберете то, что вам нужно
-
-
-
Take the SL#2.5 screwdriver and pry off the back cover
-
The phone should now look like the second picture
-
-
-
Take the SL#2.5 screwdriver and lift up the white connector at the top right corner of the phone on the side with the circuit board
-
-
-
Next lift up the camera lens from the board.
-
It should now look like the second picture
-
Then lift up the circuit circled in red on the second picture
-
-
-
Take the SL#2.5 screwdriver and pry off the volume buttons on the side of the phone
-
The circuit board should now be detached from the LCD part of the phone
-
-
-
Next take the SL#2.5 screwdriver and pry the buttons off the phone and replace with the new ones
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Команда
UW Stout, Team 5-3, Zhou Fall 2011 Участник UW Stout, Team 5-3, Zhou Fall 2011
UWSTOUT-ZHOU-F11S5G3
4 членов
Автор 6 руководств
