Этот документ имеет более свежие изменения. Перейти к последней непроверенной версии.
Введение
If your Invoke is experiencing problems with powering on after being plugged in, there could be an issue with a weak or broken power port.
Выберете то, что вам нужно
-
-
-
Use a #10 Torx screwdriver to remove two 10 mm screws from board attached to ports.
-
Pull board up lightly.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
Еще один человек закончил это руководство.