Перейти к основному содержанию

Эта версия возможно содержит некорректные исправления. Переключить на последнюю проверенную версию.

Выберете то, что вам нужно

  1. Этот шаг не переведен. Помогите перевести

    : шаг 1, изображение 1 из 3 : шаг 1, изображение 2 из 3 : шаг 1, изображение 3 из 3
    • Lay the tablet on a flat surface with the screen facing downward.

    • Use a guitar pick to pry up the rear most layer of the tablet, starting by the cover of the sim card.

    • Use a spudger to pry along the edges of the back layer of the tablet. Use the guitar picks to keep the edges propped open.

  2. Этот шаг не переведен. Помогите перевести

    : шаг 2, изображение 1 из 2 : шаг 2, изображение 2 из 2
    • Before opening the second layer, use a screwdriver to remove all the screws along the edges.

    • The top left screw has an anti-tamper seal on it. Damage to this seal will void any warranties of the tablet.

  3. Этот шаг не переведен. Помогите перевести

    : шаг 3, изображение 1 из 2 : шаг 3, изображение 2 из 2
    • Once the screws are removed, use a spudger and guitar picks to unclip the bezel.

    • Removing the battery and flexi rigid circuit board will likely cause damage. In order to disassemble further, you may also need to replace these parts.

    • To reassemble, first remove the sim card, then follow these instructions in reverse order.

    • Make sure the buttons are properly seated before snapping the first layer back on.

Финишная черта

rarazzell

Участник с: 07/07/18

109 Репутация

1 руководство автора

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 5

За последние 30 дней: 7

За всё время: 449