1. Use a #0 Phillips head screwdriver and unscrew the sixteen 7mm screws on the back of the device.
    • Use a #0 Phillips head screwdriver and unscrew the sixteen 7mm screws on the back of the device.

  2. Use a plastic opening tool to take off the back plastic panel. Use a plastic opening tool to take off the back plastic panel. Use a plastic opening tool to take off the back plastic panel.
    • Use a plastic opening tool to take off the back plastic panel.

  3. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  4. Use a Phillips #0 head screwdriver to remove the four 7mm screws that hold the battery in place.
    • Use a Phillips #0 head screwdriver to remove the four 7mm screws that hold the battery in place.

  5. Gently pry off the connecting wires with the plastic opening tool. Gently pry off the connecting wires with the plastic opening tool.
    • Gently pry off the connecting wires with the plastic opening tool.

  6. Lift the battery out. Lift the battery out.
    • Lift the battery out.

Заключение

To reassemble your device, follow these instructions in reverse order.

Desiree Mora

Участник с: 14.02.2018

265 Репутация

Автор 3 руководств

Команда

USF Tampa, Team S6-G6, Eyestone Spring 2018 Member of USF Tampa, Team S6-G6, Eyestone Spring 2018

USFT-EYESTONE-S18S6G6

3 членов

Автор 6 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 5

За всё время: 68