Введение
Holmes HEH8031 Circuit Board Removal Replacement
Выберете то, что вам нужно
-
-
-
Turn heater over so the controls are facing up.
-
Lift the front housing away from the back of the fan and slowly fold the front housing back down to the floor.
-
-
-
Remove four 12mm Phillips #2 screws from the circuit board.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
2 участников успешно повторили данное руководство.