Введение
This is a very simple guide that will help you dissasemble and replace the motor of your Holmes box fan, this process is easy and it only requires a screwdriver and a new motor to install.
Выберете то, что вам нужно
-
-
The first step is to make sure you unplug your fan from the outlet.
-
Make sure you also unplug the power cord from the back of the fan.
-
-
-
Now that your fan is unplugged, lay it flat with the brand label facing upward.
-
Next is to remove the front cover.
-
Remove the six screws from the perimeter of the cover in order to remove the front cover.
-
-
-
Next is the back cover.
-
Flip over the fan so you have access to these six screws.
-
Remove the six screws from the perimeter of the cover in order to remove the back cover.
-
-
-
-
Remove these four screws in order to remove the motor and fan blades from the housing.
-
-
-
The next step is to remove the mounts that held the motor to the housing.
-
Remove these four screws to remove the mounts.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
4 участников успешно повторили данное руководство.
4 Комментариев
Where might one find a replacement motor for a older box fan
Also, I would like to know where to get a replacement motor, as shown in step 4.
My version of the fan came with a similar cord, however the female end had a bump in the center on the end that latches into the fan. Without shaving that piece off, the plug doesn’t detach without taking it apart and prying it out.