Выберете то, что вам нужно
-
-
Locate the two screws on the back of the car towards the front. Use a #J0 JIS screw to loosen the screws.
-
-
-
-
Remove the back-cover off and make sure there are no rust or disconnected wires.
-
-
-
Locate the receiver which is towards the back end of the car.
-
Replace the receiver by disconnecting the wires.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
Еще один человек закончил это руководство.