Перейти к основному содержанию

Этот документ имеет более свежие изменения. Перейти к последней непроверенной версии.

How To Patch A Hole In The Wall

Выберете то, что вам нужно

  1. How To Patch A Hole In The Wall, How To Patch A Hole In The Wall: шаг 1, изображение 1 из 3 How To Patch A Hole In The Wall, How To Patch A Hole In The Wall: шаг 1, изображение 2 из 3 How To Patch A Hole In The Wall, How To Patch A Hole In The Wall: шаг 1, изображение 3 из 3
    • Sand down the hole and the area surrounding. This is in order to get paint off the wall.

  2. How To Patch A Hole In The Wall: шаг 2, изображение 1 из 2 How To Patch A Hole In The Wall: шаг 2, изображение 2 из 2
    • Use the rag and the toothbrush to clean off any excess rubble near the hole.

  3. How To Patch A Hole In The Wall: шаг 3, изображение 1 из 1
    • Follow the directions on the spackle box to prepare the spackle for application.

    • Although all spackle brands are different, spackle should have a consistency similar to toothpaste when mixed with water.

  4. How To Patch A Hole In The Wall: шаг 4, изображение 1 из 3 How To Patch A Hole In The Wall: шаг 4, изображение 2 из 3 How To Patch A Hole In The Wall: шаг 4, изображение 3 из 3
    • Take the spackle mix and apply it to the hole.

    • Make sure to layer the spackle evenly and remove excess spackle.

  5. How To Patch A Hole In The Wall: шаг 5, изображение 1 из 1
    • Wait 30-45 minutes for the spackle patch to dry.

    • Wait time may vary depending on the depth of the hole and spackle mix used.

  6. How To Patch A Hole In The Wall: шаг 6, изображение 1 из 1
    • Make sure the spackle is dry.

    • Sand the spackle until it is smooth and flush with the wall.

Заключение

Now your wall should be looking as good as new!

3 участников успешно повторили данное руководство.

Joseph Garcia

Участник с: 09/29/15

293 Репутация

1 руководство автора

Команда

Cal Poly, Team 17-2, Green Fall 2015 Участник Cal Poly, Team 17-2, Green Fall 2015

CPSU-GREEN-F15S17G2

4 членов

Автор 8 руководств

Один комментарий

I suggest using a sanding sponge or block in step 6

Dennis - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 10

За всё время: 1,457