Введение

The video below details how to wirelessly transfer data from your previous 2DS/3DS systems to the New 3DS XL. If you'd prefer to do a physical transfer, our guide will show you how to manually transfer the data off of your old 2DS/3DS SD card onto the microSD card of the New 3DS XL.

Запчасти

Никакие детали не требуются.

Video Overview

Start by removing the stylus from the frame of the New 3DS XL.
  • Start by removing the stylus from the frame of the New 3DS XL.

Добавить комментарий

Loosen the two captive Phillips #1 screws on the back of the device. These captive screws will conveniently stay in the rear cover, so don't try to remove them. Prying from the thumb slots on each side, pull the rear panel off the back of the device.
  • Loosen the two captive Phillips #1 screws on the back of the device.

    • These captive screws will conveniently stay in the rear cover, so don't try to remove them.

  • Prying from the thumb slots on each side, pull the rear panel off the back of the device.

Добавить комментарий

Press the microSD card slightly deeper into its slot until you hear a click.
  • Press the microSD card slightly deeper into its slot until you hear a click.

  • After the click, release the card and it will pop out of its slot.

  • Use a PC to copy the data from the source SD card to the New 3DS XL microSD card.

  • For reassembly, push the microSD card into the slot until it clicks in place.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

3 участников успешно повторили данное руководство.

Geoff Wacker

Участник с: 30.09.2013

69 158 Репутация

Автор 143 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 1

За 7 дней: 13

За 30 дней: 42

За всё время: 2,328