Перейти к основному содержанию

Введение

If the hook end (male end) of your buckle is broken, it’s easy to replace. We’ll show you how in just a few easy steps.

  1. In order to determine the correct buckle size, measure the webbing. The webbing illustrated here is 15 mm, so you would need a 15 mm buckle.
    • In order to determine the correct buckle size, measure the webbing. The webbing illustrated here is 15 mm, so you would need a 15 mm buckle.

  2. Remove the broken buckle from the webbing by first pulling the webbing through the locking strap and then unthreading it from the buckle. Use a screwdriver or tweezers to help pull the webbing through, if necessary. Use a screwdriver or tweezers to help pull the webbing through, if necessary.
    • Remove the broken buckle from the webbing by first pulling the webbing through the locking strap and then unthreading it from the buckle.

    • Use a screwdriver or tweezers to help pull the webbing through, if necessary.

Заключение

Follow the instructions in reverse order to finish your repair.

3 участников успешно повторили данное руководство.

Особая благодарность этим переводчикам:

100%

These translators are helping us fix the world! Хотите внести свой вклад?
Начните переводить ›

VAUDE Reparaturteam

Участник с: 22.02.2016

5 517 Репутация

Автор 31 руководств

Команда

Vaudesport Member of Vaudesport

Community

3 членов

Автор 62 руководств

Добавить комментарий

Просмотр статистики:

Past 24 Hours: 2

Past 7 Days: 28

Past 30 Days: 156

За всё время: 9,057