Перейти к основному содержанию

Введение

After years of use, you might need to replace the Klickfix mounting plate on your Aqua Box. It just takes a few steps—read on to find out how.

  1. Loosen all 4 screws on the mounting plate by holding the nuts on the outside with a socket wrench #7 and unscrewing the screws with a standard Phillips #2 screwdriver. Loosen all 4 screws on the mounting plate by holding the nuts on the outside with a socket wrench #7 and unscrewing the screws with a standard Phillips #2 screwdriver. Loosen all 4 screws on the mounting plate by holding the nuts on the outside with a socket wrench #7 and unscrewing the screws with a standard Phillips #2 screwdriver.
    • Loosen all 4 screws on the mounting plate by holding the nuts on the outside with a socket wrench #7 and unscrewing the screws with a standard Phillips #2 screwdriver.

  2. Replace the defective plate with the new plate.
    • Replace the defective plate with the new plate.

Заключение

To finish the repair follow the instructions in reverse order.

Особая благодарность этим переводчикам:

100%

These translators are helping us fix the world! Хотите внести свой вклад?
Начните переводить ›

VAUDE Reparaturteam

Участник с: 22.02.2016

5 517 Репутация

Автор 31 руководств

Команда

Vaudesport Member of Vaudesport

Community

3 членов

Автор 62 руководств

Добавить комментарий

Просмотр статистики:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 21

За всё время: 428